Composite Threaded-to-Tube Male Y – One Touch Push-In Fitting
From: $8.28
or 4 fortnightly payments from $2.07 with 
More info
Get volume discounts store-wide
Register now to get access to the following store-wide discounts
Description
Composite Threaded-to-Tube Male Y – One Touch Push-In Fitting: PWT
Male y, metric tube, BSP taper and metric.
– One-touch joints used in pneumatic piping. Easy to connect/disconnect tube with one touch.
– Can be applied and removed easily in confined spaces.
– Can be used under a wide range of pressures.
Method of Application
- Make sure that the end of the tube is cut at 90 degrees and free of burrs.
- Push the tube through the ‘collar’ into the fitting.
- Continue pushing the tube past the ‘packing’ allowing the lock claws to fully hold the tube in place. This is to ensure leakages do not occur.
- To remove the tube simply press the sleeve to recess the lock claws then pull out the tube.
Specifications
| Tubing A | 12mm, 10mm, 8mm, 6mm, 4mm |
|---|---|
| Thread A | 1/2BSPT, 3/8BSPT, 1/4BSPT, 1/8BSPT, M5 |
| Material | Composite |
| Fitting Shape | Y Style |
| Fitting Gender | Male |
| Connection Style | Threaded-to-Tube |
| Fluid | Air (no other gases or liquids) |
| Working Pressure Range | 0~284 PSI | 0~20 Kgf/c㎡(0~1960kPa) |
| Negative Pressure | -29.5" Hg | -750mmHg(10Torr) |
| Temperature Range | 0~60°C |
| Application Tube Material | Polyurethane and Nylon |
Questions & Answers
There are no questions yet. Be the first to ask a question about this product.
Only registered users are eligible to enter questions
Related products
From: $1.70
From: $4.95
From: $3.60
Reviews
There are no reviews yet.